学术论文

      高固含固液搅拌槽内颗粒悬浮与混合特性

      Particle suspension and mixing characteristics in a solid-liquid stirred tank with high solid content

      摘要:
      对高固含体系下Intermig桨搅拌槽内的桨叶搅拌性能以及颗粒的混合与悬浮特性进行实验研究.采用光导纤维技术对不同桨径、搅拌转速和桨叶离底距离下搅拌槽内底部以及轴向颗粒密度进行测量,同时对临界悬浮转速和搅拌功率进行测定.实验结果表明:对高固含液-固搅拌体系,所采用的Intermig搅拌桨具有很好的轴向混合特性,该桨适合在较大的桨径和较低的桨叶离底距离下应用,可在促进颗粒悬浮与均匀分布的同时,大大降低功率消耗.通过对实验结果的分析和拟合得出底部均匀度与搅拌槽内弗劳德数有关,Q=0.58Fr-0.35,Intermig搅拌桨功率准数在0.2 ~0.3之间,且与雷诺数关系为NP=2.1Re-0.2.
      Abstract:
      The suspension and mixing characteristics of high-content solid particles were experimentally studied in a tank stirred with an Intermig impeller.An optical fiber technology was adopted to measure the bottom and axial solid concentration under different conditions of impeller diameter,rotational speed and impeller-bottom distance,and the critical suspension speed and power consumption were also investigated at the same time.The results show that the Intermig impeller has good axial mixing performance in the solid-liquid stirred system with high solid content.High impeller diameter and low impeller-bottom distance could improve the solid suspension and uniform distribution with low power consumption.By analyzing and fitting the experimental results,the bottom solid uniformity is calculated by Froude number with the equation of Q =0.58Fr-0.35 and the power number is calculated by Reynolds number with the equation of NP =2.1Re-0.2.
      作者: 赵洪亮 [1] 殷攀 [2] 张立峰 [1]
      Author: ZHAO Hong-liang [1] YIN Pan [2] ZHANG Li-feng [1]
      作者单位: 北京科技大学冶金与生态工程学院,北京100083;稀贵金属绿色回收与提取北京市重点实验室,北京100083 北京科技大学冶金与生态工程学院,北京,100083
      刊 名: 工程科学学报 ISTICEIPKU
      年,卷(期): 2017, 39(1)
      分类号: TQ027.1
      在线出版日期: 2017年4月17日
      基金项目: 国家自然科学基金资助项目,中国博士后科学基金资助项目,中央高校基本科研业务费资助项目